Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| Water absorption rate | | ISO 62 | 0.2 % |
| Water absorption rate | | ISO 62 | 0.5 % |
| Shrinkage rate | | ISO 294-4 | 1.6 % |
| Shrinkage rate | | ISO 294-4 | 1.7 % |
| density | | ISO 1183 | 1.30 g/cm |
| density | | ISO1183 | 1.30 g/cm³ |
| melt mass-flow rate | | ISO1133 | 10 g/10min |
| Shrinkage rate | | ISO294-4 | 1.7 % |
| Shrinkage rate | | ISO294-4 | 1.7 % |
| Water absorption rate | | ISO62 | 0.50 % |
| Water absorption rate | | ISO62 | 0.20 % |
| MediumDensity | | | 1.11 g/cm³ |
| Ejection Temperature | | | 170 °C |
| SpecificHeatCapacity of Melt | | | 2100 J/kg/°C |
| ThermalConductivityofMelt | | | 0.21 W/m/K |
| flammability | Test Condition | Test Method | Test Result |
|---|
| UL flame retardant rating | | UL94 | HB |
| UL flame retardant rating | | UL94 | HB |
| UL flame retardant rating | | IEC60695-11-10,-20 | HB |
| UL flame retardant rating | | IEC60695-11-10,-20 | HB |
| Limiting Oxygen Index | | ISO4589-2 | 22 % |
| FMVSS flammability | | FMVSS302 | SE |
| Supplementary Information | Test Condition | Test Method | Test Result |
|---|
| Emissions of Organic Compounds | | VDA277 | 145 µgC/g |
| Odor | | VDA270 | 3.00 |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| Yield point tensile stress | | ISO 527-1, -2 | 57 MPa |
| Tensile creep modulus | | ISO 899-1 | 2600 MPa |
| Tensile creep modulus | | ISO 899-1 | 1800 MPa |
| Tensile modulus | | ISO 527-1, -2 | 2700 MPa |
| bending strength | | ISO 178 | 85 MPa |
| Charpy non notched impact strength | | ISO 179 | No Break KJ/m |
| Charpy non notched impact strength | | ISO 179 | No Break KJ/m |
| Charpy notch impact strength | | ISO 179 | 4 KJ/m |
| Charpy notch impact strength | | ISO 179 | 5.4 KJ/m |
| Non notched impact strength | | ISO 180 | No Break KJ/m |
| Notch impact strength | | ISO 180 | 6.5 KJ/m |
| Tensile modulus | | ISO527-2 | 2600 Mpa |
| Tensile stress | | ISO527-2 | 57.0 Mpa |
| Tensile strain | | ISO527-2 | 4.0 % |
| Nominal tensile fracture strain | | ISO527-2 | >50 % |
| TensileCreepModule | | ISO899-1 | 2300 Mpa |
| Tensile creep modulus | | ISO899-1 | 1800 Mpa |
| Flexural modulus | | ISO178 | 2300 Mpa |
| Bending stress | | ISO178 | 85.0 Mpa |
| Other performance | Test Condition | Test Method | Test Result |
|---|
| Limiting Oxygen Index | | ISO 4589-1, -2 | 22 % |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|
| Charpy Notched Impact Strength | | ISO179/1eA | 4.0 kJ/m² |
| Charpy Notched Impact Strength | | ISO179/1eA | 5.0 kJ/m² |
| Impact strength of simply supported beam without notch | | ISO179/1eU | NoBreak |
| Impact strength of simply supported beam without notch | | ISO179/1eU | NoBreak |
| Impact strength of cantilever beam gap | | ISO180/1A | 5.0 kJ/m² |
| Impact strength of cantilever beam gap | | ISO180/1A | 5.0 kJ/m² |
| | ISO180/1U | 130 kJ/m² |
| | ISO180/1U | NoBreak |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|
| Surface Resistivity | | IEC60093 | 1E+15 ohms |
| Volume resistivity | | IEC60093 | >1.0E+15 ohms·cm |
| dielectric strength | | IEC60243-1 | 26 KV/mm |
| dielectric strength | | IEC60243-1 | 26 KV/mm |
| dielectric strength | | IEC60243-1 | 15 KV/mm |
| | IEC60250 | 3.60 |
| | IEC60250 | 3.20 |
| Dissipation Factor | | IEC60250 | 1E-03 |
| Dissipation Factor | | IEC60250 | 0.020 |
| CTI | | IEC60112 | 400 V |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| Flame retardancy | | | UL94 HB |
| Flame retardancy | | | UL 94 HB |
| melting temperature | | ISO 3146 | 225 ℃ |
| | ISO 11359-1, -2 | 0.00013 cm/cm/℃ |
| | ISO 11359-1, -2 | 0.00013 cm/cm/℃ |
| | ISO 75B-1, -2 | 160 ℃ |
| | ISO 75A-1, -2 | 60 ℃ |
| Flame retardancy | | | UL 94 HB |
| | ISO11359-2 | 8E-05 cm/cm/°C |
| | ISO11359-2 | 1.9E-04 cm/cm/°C |
| | ISO11359-2 | 1.2E-04 cm/cm/°C |
| | ISO11359-2 | 9E-05 cm/cm/°C |
| | ISO11359-2 | 2E-04 cm/cm/°C |
| | ISO75-2/B | 115 °C |
| | ISO75-2/B | 180 °C |
| | ISO75-2/A | 50.0 °C |
| | ISO75-2/A | 60.0 °C |
| Glass transition temperature 2 | | ISO11357-2 | 55.0 °C |
| vicat | | ISO306/B50 | 175 °C |
| melting temperature | | ISO11357-3 | 224 °C |
| | ISO11359-2 | 1.1E-04 cm/cm/°C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare
View Prices