PP EP332K BASELL THAILAND

Form：Granules | Grade：Injection grade

Properties:

High rigidityHigh toughnessLow temperature impact reheat-resistingGood resistance to heat a

Typical Applications:

Toysporting goodsHousehold goodschipAutomotive sectorAutomotive Applications

Supplier(1)

Product Description

Certificates(1)

Datasheet

Product Description

Typical Applications:	Toy \| sporting goods \| Household goods \| chip \| Automotive sector \| Automotive Applications
Properties:	High rigidity \| High toughness \| Low temperature impact re \| heat-resisting \| Good resistance to heat a

Certificates

Technical Data Sheet

Basic Performance	Test Condition	Test Method	Test Result	Test Unit
melt mass-flow rate	230°C/2.16 kg	ASTM D1238	5	g/10min
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
Impact strength of cantilever beam gap	23℃	ASTM D256	147
Bending modulus		ASTM D790	1130	Mpa
Elongation at Break	Yield	ASTM D638	9	%
tensile strength	Yield	ASTM D638	24.5	Mpa
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Hot deformation temperature	0.45Mpa, Unannealed	ASTM D648	88	°C
Physical properties	Test Condition	Test Method	Test Result	Test Unit
density		ASTM D792	0.9

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top