PF Generic PF - Glass Fiber
0
- Properties:Fillersglass fiber reinforced materials
CompareTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| density | ISO 1183 | 1.59to1.72 g/cm³ | |
| Apparent density | ISO 60 | 0.61to1.00 g/cm³ | |
| Shrinkage rate | ISO 294-4 | 0.041to0.51 % |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| bending strength | ISO 178 | 124to143 MPa | |
| compression stress | ISO 604 | 175to325 MPa | |
| Flexural modulus | ISO 178 | 10100to13500 MPa |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Charpy Notched Impact Strength | ISO 179 | 2.0to4.0 kJ/m² | |
| Impact strength of simply supported beam without notch | ISO 179 | 6.0to15 kJ/m² |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Surface Resistivity | IEC 60093 | 9.6E+10到5.0E+11 ohms | |
| Volume resistivity | IEC 60093 | 9.6E+11到5.0E+12 ohms·cm | |
| dielectric strength | IEC 60243-1 | 24to30 kV/mm | |
| relative permittivity | IEC 60250 | 7.10 | |
| Dissipation Factor | IEC 60250 | 0.048to0.20 |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Heat distortion temperature | ISO 75-2/C | 150to190 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top