PBT LNP™ LUBRICOMP™ WFL4036
91
- Properties:High temperature resistanwear resistant
- Usages:Plastic bagAutomotive ApplicationsIndustrial applications
Compare
View PricesTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Water absorption rate | ASTM D570 | 0.040 % | |
| ISO 62 | 0.040 % | ||
| Shrinkage rate | ASTM D955 | 0.10-0.30 % | |
| ASTM D955 | 0.50-1.0 % | ||
| ISO 294-4 | 0.50-1.0 % | ||
| ISO 294-4 | 0.10-0.30 % |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Tensile modulus | ASTM D638 | 10300 Mpa | |
| ISO 527-2/1 | 10600 Mpa | ||
| tensile strength | ASTM D638 | 118 Mpa | |
| ISO 527-2 | 118 Mpa | ||
| elongation | ASTM D638 | 2.3 % | |
| Tensile strain | ISO 527-2 | 2.2 % | |
| Flexural modulus | ASTM D790 | 10200 Mpa | |
| ISO 178 | 10000 Mpa | ||
| bending strength | ASTM D790 | 193 Mpa | |
| ISO 178 | 187 Mpa | ||
| coefficient of friction | ASTM D3702Modified | 0.57 | |
| ASTM D3702Modified | 0.41 | ||
| Wear factor | ASTM D3702Modified | 42.0 10^-10in^5-min/ft-lb-hr |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Impact strength of cantilever beam gap | ISO 180/1A | 9.2 kJ/m² | |
| Suspended wall beam without notch impact strength | ISO 180/1U | 43 kJ/m² | |
| Dart impact | ASTM D3763 | 13.7 J | |
| Multi axis Instrumented Impact Energy | ISO 6603-2 | 2.61 J |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Heat distortion temperature | ASTM D648 | 218 °C | |
| ISO 75-2/Af | 214 °C | ||
| Linear coefficient of thermal expansion | ASTME831 | 3.9E-05 cm/cm/°C | |
| ISO 11359-2 | 3.9E-05 cm/cm/°C | ||
| ASTME831 | 6.7E-05 cm/cm/°C | ||
| ISO 11359-2 | 6.7E-05 cm/cm/°C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top