PP PPH-M180 SINOPEC LUOYANG

Form：Granules | Grade：Injection grade

Properties:

HomopolymerHigh mobilityLow temperature resistancPolymer type: homopolymerProcessing method: inject

Typical Applications:

Food service sectorInjection molded parts

Supplier(1)

Product Description

Certificates(0)

Datasheet

Product Description

Typical Applications:	Food service sector \| Injection molded parts
Properties:	Homopolymer \| High mobility \| Low temperature resistanc \| Polymer type: homopolymer \| Processing method: inject

Certificates

No Data...

Technical Data Sheet

Basic Performance	Test Condition	Test Method	Test Result	Test Unit
melt mass-flow rate			1.8±0.4	g/10min
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
Bending modulus			≥1.2	GPa
tensile strength	Yield		≥30.4	Mpa
Impact strength of cantilever beam gap	23℃		≥19.6	J/m
Physical properties	Test Condition	Test Method	Test Result	Test Unit
ash content			≤0.03	%
Huangdu Index			≤4
Equal standard index			≥94.5	%
Cleanliness			6-10	分/千克

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top