Share
Add to compare

Epoxy EPO-TEK® 302-3M Epoxy Technology Inc.

Typical Applications:
Coating applications bonding seals electrical and electronic applications optical applications medical and nursing supplies light-emitting diodes adhesives
Product Description
Certificates(0)
Datasheet

Product Description

Typical Applications:Coating applications | bonding | seals | electrical and electronic applications | optical applications | medical and nursing supplies | light-emitting diodes | adhesives

Certificates

No Data...

Technical Data Sheet

Cured PropertiesTest ConditionTest MethodTest ResultTest Unit
Volume resistivity23°C>1.0E+13ohms·cm
Relative permittivity1kHz3.39
LapShearStrength23°C>13.8MPa
Shore hardnessShoreD80
Dissipation factor1kHz6.1E-03
Uncured PropertiesTest ConditionTest MethodTest ResultTest Unit
densityPot Life60min
Color--6Clear/Transparent
density固化时间(65°C)3.0hr
density粘度8(23°C)0.80to1.6Pa·s
densityPartA1.20g/cm³
densityPartB0.958g/cm³
Color--7Clear/Transparent
optical performanceTest ConditionTest MethodTest ResultTest Unit
transmissivity460to1620nm>95.0%
Refractive index1.545
thermosettingTest ConditionTest MethodTest ResultTest Unit
Thermosetting components按重量计算的混合比100
Thermosetting componentsPartB按重量计算的混合比:45
Thermosetting componentsShelf Life(23°C)52wk
thermal performanceTest ConditionTest MethodTest ResultTest Unit
Linear coefficient of thermal expansionMD:--41.9E-04cm/cm/°C
Linear coefficient of thermal expansionMD:--35.6E-05cm/cm/°C
Glass transition temperature>55.0°C
Physical propertiesTest ConditionTest MethodTest ResultTest Unit
Ionic typeNH4+1ppm
Ionic typeNa+10ppm
Ionic typeK+4ppm
Ionic typeCl-42ppm
Supplementary InformationTest ConditionTest MethodTest ResultTest Unit
operate temperatureIntermittent-55-250°C
operate temperatureStorageModulus(23°C)1.73GPa
weight loss on heating250°C0.77%
weight loss on heating300°C1.2%
operate temperatureContinuous-55-175°C
Shear Strength23°C23.4MPa
DegradationTemperatureTGA351°C
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.