GPPS MF-21 DENKA JAPAN

Form：Granules | Grade：Injection grade

Properties:

High rigidityheat-resisting

Typical Applications:

currency

Supplier(0)

Product Description

Certificates(0)

Datasheet

Product Description

Typical Applications:	currency
Properties:	High rigidity \| heat-resisting

Certificates

No Data...

Technical Data Sheet

optical performance	Test Condition	Test Method	Test Result	Test Unit
Refractive index		ASTM D542	1.590	%
transmissivity		ASTM D1003	90.0	%
turbidity		ASTM D1003	0.30	%
other	Test Condition	Test Method	Test Result	Test Unit
characteristic			刚性高.耐热性高.生产阶段快
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
Rockwell hardness	23℃	ISO 2039-2	73	M 计秤
tensile strength	Yield, 23℃	ISO 527-2	43.0	Mpa
Tensile strain	Break, 23℃	ISO 527-2	<3.0	%
Bending modulus	23℃	ISO 178	3220	Mpa
bending strength	23℃	ISO 178	91.0	Mpa
Charpy Notched Impact Strength	23℃	ISO 179	2.1	kJ/m²
bending strength		ASTM D790/ISO 178	927.96	kg/cm²(MPa)[Lb/in²]
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Hot deformation temperature	0.45 MPa, Unannealed	ISO 75-2/B	85.0	°C
Hot deformation temperature	Hot deformation temperature	1.8 MPa, Unannealed	ISO 75-2/A	72.0	°C
Vicat softening temperature		ISO 306/A	97.0	°C
Vicat softening temperature	Vicat softening temperature		ISO 306/B	93.0	°C
Physical properties	Test Condition	Test Method	Test Result	Test Unit
melt mass-flow rate	2003℃/5.0 kg	ISO 1133	5.9	g/10 min
Shrinkage rate	MD	ISO 294-4	0.30 - 0.70	%
density		ASTM D792/ISO 1183	1.05
melt mass-flow rate		ASTM D1238/ISO 1133	5.9	g/10min

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top