Phenolic Resiten® 100 Iten Industries

Product Description

Certificates(0)

Datasheet

Product Description

Certificates

No Data...

Technical Data Sheet

impact performance	Test Condition	Test Method	Test Result	Test Unit
Impact strength of cantilever beam gap	横向Flow:1.57mm	ASTM D256	29	J/m
	Impact strength of cantilever beam gap	横向Flow:3.18mm	ASTM D256	26	J/m
		Impact strength of cantilever beam gap	横向Flow:12.7mm	ASTM D256	28	J/m
			Impact strength of cantilever beam gap	Flow:1.57mm	ASTM D256	35	J/m
				Impact strength of cantilever beam gap	Flow:3.18mm	ASTM D256	30	J/m
				Impact strength of cantilever beam gap	Impact strength of cantilever beam gap	Flow:12.7mm	ASTM D256	35	J/m
flammability	Test Condition	Test Method	Test Result	Test Unit
UL flame retardant rating	1.6mm	UL 94	HB
	UL flame retardant rating	3.2mm	UL 94	HB
	UL flame retardant rating	UL flame retardant rating	12.7mm	UL 94	V-0
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
compressive strength	12.7mm5	ASTM D695	389	MPa
	compressive strength	12.7mm4	ASTM D695	390	MPa
	compressive strength	compressive strength	3.18mm4	ASTM D695	136	MPa
tensile strength	横向Flow:1.57mm	ASTM D638	122	MPa
	tensile strength	Flow:1.57mm	ASTM D638	164	MPa
		tensile strength	Flow:3.18mm	ASTM D638	176	MPa
		tensile strength	tensile strength	横向Flow:3.18mm	ASTM D638	121	MPa
bending strength	1.57mm2	ASTM D790	200	MPa
	bending strength	1.57mm3	ASTM D790	177	MPa
		bending strength	3.18mm2	ASTM D790	185	MPa
			bending strength	3.18mm3	ASTM D790	168	MPa
				bending strength	12.7mm2	ASTM D790	186	MPa
				bending strength	bending strength	12.7mm3	ASTM D790	146	MPa
compressive strength	1.57mm4	ASTM D695	71.7	MPa
compressive strength	compressive strength	1.57mm5	ASTM D695	57.9	MPa
thermal performance	Test Condition	Test Method	Test Result	Test Unit
RTI Elec	1.6mm	UL 746	130	°C
RTI	1.6mm	UL 746	130	°C
Physical properties	Test Condition	Test Method	Test Result	Test Unit
Water absorption rate	24hr,12.7mm	ASTM D570	0.54	%
	Water absorption rate	24hr,3.18mm	ASTM D570	1.1	%
	Water absorption rate	Water absorption rate	24hr,1.57mm	ASTM D570	1.8	%
density		ASTM D792	1.38	g/cm³
Electrical performance	Test Condition	Test Method	Test Result	Test Unit
Dielectric constant	1.57mm,1kHz	ASTM D150	6.28
Dielectric constant	Dielectric constant	1.57mm,60Hz	ASTM D150	8.01
Dielectric strength	3.18mm	ASTM D149	18	kV/mm
High arc combustion index	1.57mm	UL 746	PLC 0
Compared to the anti leakage trace index	1.57mm	UL 746	PLC 3
Arc resistance	12.7mm	ASTM D495	82.0	sec
	Arc resistance	3.18mm	ASTM D495	79.0	sec
	Arc resistance	Arc resistance	1.57mm	ASTM D495	78.0	sec
Dissipation factor	3.18mm,1MHz	ASTM D150	0.047
	Dissipation factor	3.18mm,60kHz	ASTM D150	0.33
		Dissipation factor	3.18mm,1kHz	ASTM D150	0.13
		Dissipation factor	Dissipation factor	1.57mm,1MHz	ASTM D150	0.041
Dielectric constant	3.18mm,1MHz	ASTM D150	5.42
	Dielectric constant	3.18mm,1kHz	ASTM D150	7.07
		Dielectric constant	3.18mm,60Hz	ASTM D150	9.67
		Dielectric constant	Dielectric constant	1.57mm,1MHz	ASTM D150	5.00
High voltage arc tracing rate	1.57mm	UL 746	PLC 0	mm/min
Hot wire ignition	1.57mm	UL 746	PLC 3	sec
Dielectric strength	1.57mm	ASTM D149	78000	V
Dissipation factor	1.57mm,1kHz	ASTM D150	0.10
Dielectric strength	1.57mm	ASTM D149	28	kV/mm
	Dielectric strength	3.18mm	ASTM D149	60000	V
	Dielectric strength	Dielectric strength	1.27cm	ASTM D149	42000	V
Dissipation factor	1.57mm,60kHz	ASTM D150	0.26

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top