PC/PBT 1731J-1001 SABIC INNOVATIVE THAILAND

Form：Granules | Grade：Injection grade

Properties:

Chemical resistanceHigh impact resistanceHigh mobilityUV resistance

Typical Applications:

medical carePlastic bagGearsAutomotive Applications

Supplier(1)

Product Description

Certificates(0)

Datasheet

Product Description

Typical Applications:	medical care \| Plastic bag \| Gears \| Automotive Applications
Properties:	Chemical resistance \| High impact resistance \| High mobility \| UV resistance

Certificates

No Data...

Technical Data Sheet

impact performance	Test Condition	Test Method	Test Result	Test Unit
Impact strength of cantilever beam gap	-30°C	ISO 180/1A	16	kJ/m²
Impact strength of cantilever beam gap	Impact strength of cantilever beam gap	23°C	ISO 180/1A	59	kJ/m²
Dart impact	-30°C,TotalEnergy	ASTM D3763	61.5	J
Dart impact	Dart impact	23°C,TotalEnergy	ASTM D3763	61.1	J
Charpy Notched Impact Strength	23°C	ISO 179/1eA	65	kJ/m²
flammability	Test Condition	Test Method	Test Result	Test Unit
UL flame retardant rating	1.5mm	UL 94	HB
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
tensile strength	Break	ISO 527-2/50	58.0	Mpa
elongation	Yield	ASTM D638	5.0	%
Tensile strain	Yield	ISO 527-2/50	5.0	%
elongation	Break	ASTM D638	100	%
Tensile strain	Break	ISO 527-2/50	90	%
Bending modulus	50.0mmSpan	ASTM D790	2340	Mpa
Bending modulus	Bending modulus		ISO 178	2210	Mpa
bending strength		ISO 178	93.0	Mpa
bending strength	bending strength	Yield,50.0mmSpan	ASTM D790	93.1	Mpa
Tensile modulus		ASTM D638	2370	Mpa
Tensile modulus	Tensile modulus		ISO 527-2/1	2330	Mpa
tensile strength	Yield	ASTM D638	61.4	Mpa
	tensile strength	Yield	ISO 527-2/50	60.0	Mpa
	tensile strength	tensile strength	Break	ASTM D638	56.0	Mpa
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Hot deformation temperature	1.8MPa,Unannealed,64.0mmSpan	ISO 75-2/Af	99.0	°C
Vicat softening temperature		ASTM D152510	125	°C
	Vicat softening temperature	--	ISO 306/B50	127	°C
	Vicat softening temperature	Vicat softening temperature	--	ISO 306/B120	130	°C
Linear coefficient of thermal expansion	MD：-40to40°C	ASTME831	7.8E-05	cm/cm/°C
	Linear coefficient of thermal expansion	MD：-40to95°C	ASTME831	8.3E-05	cm/cm/°C
		Linear coefficient of thermal expansion	MD：-40to40°C	ISO 11359-2	7.8E-05	cm/cm/°C
			Linear coefficient of thermal expansion	TD：-40to40°C	ASTME831	7.6E-05	cm/cm/°C
			Linear coefficient of thermal expansion	Linear coefficient of thermal expansion	TD：-40to40°C	ISO 11359-2	7.6E-05	cm/cm/°C
Hot deformation temperature	0.45MPa,Unannealed,6.40mm	ASTM D648	116	°C
	Hot deformation temperature	1.8MPa,Unannealed,3.20mm	ASTM D648	93.0	°C
	Hot deformation temperature	Hot deformation temperature	1.8MPa,Unannealed,6.40mm	ASTM D648	107	°C
RTI Elec		UL 746	75.0	°C
RTI Imp		UL 746	75.0	°C
RTI Str		UL 746	75.0	°C
Physical properties	Test Condition	Test Method	Test Result	Test Unit
Specific volume		ASTM D792	0.820	cm³/g
melt mass-flow rate	250°C/5.0kg	ASTM D1238	9.6	g/10min
melt mass-flow rate	melt mass-flow rate	250°C/5.0kg	ISO 1133	8.0	g/10min
Shrinkage rate	MD：3.20mm	Internal Method	0.50-0.70	%
Shrinkage rate	Shrinkage rate	TD：3.20mm	Internal Method	0.60-0.80	%
Water absorption rate	Saturation,23°C	ISO 62	0.28	%
Water absorption rate	Water absorption rate	Equilibrium,23°C,50%RH	ISO 62	0.080	%
Electrical performance	Test Condition	Test Method	Test Result	Test Unit
Arc resistance		ASTM D495	PLC 5
Compared to the anti leakage trace index	CTI	UL 746	PLC 2
High arc combustion index	HAI	UL 746	PLC 0
High voltage arc tracing rate	HVTR	UL 746	PLC 2
Hot wire ignition	HWI	UL 746	PLC 2

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top