PC LEXAN™ 121R-701 SABIC INNOVATIVE THAILAND

Properties:
Low viscosity
High temperature resistan
Usages:
building materials
Profile
Certificates:
UL
Compare

Technical Data Sheet

physical property	Test Condition	Test Method	Test Result
density		ASTMD792	1.20 g/cm³
Specific volume		ASTMD792	0.835 cm³/g
density		ASTMD792	1.19 g/cm³
melt mass-flow rate		ASTMD1238	18 g/10min
Shrinkage rate		内部方法	0.50to0.70 %
Water absorption rate		ASTMD570	0.15 %
	Water absorption rate		ASTMD570	0.35 %
	Water absorption rate	Water absorption rate		ASTMD570	0.58 %
Outdoor applicability		UL746C	f2

hardness	Test Condition	Test Method	Test Result
Rockwell hardness		ASTMD785	70
Rockwell hardness	Rockwell hardness		ASTMD785	118

optical performance	Test Method	Test Result
refractive index	ASTMD542	1.586
transmissivity	ASTMD1003	88.0 %
Haze ratio	ASTMD1003	1.0 %

flammability	Test Condition	Test Method	Test Result
UL flame retardant rating		UL94	HB
RadiantPanelListing			YES

Mechanical properties	Test Condition	Test Method	Test Result
elongation		ASTMD638	130 %
Flexural modulus		ASTMD790	2340 Mpa
bending strength		ASTMD790	96.5 Mpa
Taber Abrasion Resistance		ASTMD1044	10.0 mg
tensile strength		ASTMD638	62.1 Mpa
tensile strength	tensile strength		ASTMD638	68.9 Mpa
elongation		ASTMD638	7.0 %

Impact resistance	Test Condition	Test Method	Test Result
Impact strength of simply supported beam gap 4		ISO179/1eA	12 kJ/m²
Impact strength of simply supported beam gap 4	Impact strength of simply supported beam gap 4		ISO179/1eA	65 kJ/m²
Simple supported beam without notch impact strength 4		ISO179/1eU	NoBreak
Simple supported beam without notch impact strength 4	Simple supported beam without notch impact strength 4		ISO179/1eU	NoBreak
Impact strength of cantilever beam gap		ASTMD256	690 J/m
Suspended wall beam gap impact strength 5		ISO180/1A	11 kJ/m²
Suspended wall beam gap impact strength 5	Suspended wall beam gap impact strength 5		ISO180/1A	65 kJ/m²
Impact strength of cantilever beam gap		ASTMD4812	3200 J/m
Unscented Izod Impact Strength 5		ISO180/1U	NoBreak
Unscented Izod Impact Strength 5	Unscented Izod Impact Strength 5		ISO180/1U	NoBreak
Dart impact equipped with measuring instruments		ASTMD3763	62.1 J
Falling hammer impact		ASTMD3029	169 J
Tensile impact strength 6		ASTMD1822	546 kJ/m²

Electrical performance	Test Condition	Test Method	Test Result
Volume resistivity		ASTMD257	>1.0E+17 ohms·cm
Hot wire ignition (HWI)		UL746	PLC 2
dielectric strength		ASTMD149	15 KV/mm
dielectric constant		ASTMD150	3.17
	dielectric constant		ASTMD150	3.17
	dielectric constant	dielectric constant		ASTMD150	2.96
Dissipation Factor		ASTMD150	9E-04
	Dissipation Factor		ASTMD150	9E-04
	Dissipation Factor	Dissipation Factor		ASTMD150	0.010
Compared to the Leakage Tracking Index (CTI)		UL746	PLC 2
High arc combustion index (HAI)		UL746	PLC 1
High Voltage Arc Traceability Rate (HVTR)		UL746	PLC 2

Thermal performance	Test Condition	Test Method	Test Result
Heat Deflection Temperature		ASTMD648	138 °C
Heat Deflection Temperature	Heat Deflection Temperature		ASTMD648	129 °C
vicat		ASTMD15257	154 °C
Linear thermal expansion coefficient		ASTME831	6.8E-05 cm/cm/°C
specific heat		ASTMC351	1260 J/kg/°C
thermal conductivity		ASTMC177	0.25 W/m/K
RTI Elec		UL746	130 °C
RTI Imp		UL746	130 °C
RTI Str		UL746	130 °C

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top