PA66 1-1111 VP LEHVOSS GERMANY

Form：Granules | Grade：Injection grade

Supplier(1)

Product Description

Certificates(0)

Datasheet

Product Description

Certificates

No Data...

Technical Data Sheet

impact performance	Test Condition	Test Method	Test Result	Test Unit
Impact strength of simply supported beam without notch	23℃23°C	ISO 179/1eU	33	kJ/m²
Charpy Notched Impact Strength		ISO 179-1eA	11	kJ/m²
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
tensile strength	23℃23°C	ISO 527-2	190	Mpa
Tensile strain	Break，23℃23°C	ISO 527-2	3	%
bending strength	4% Strain，23℃Strain4.0％，23°C	ISO 178	285	Mpa
Bending modulus	23℃23°C	ISO 178	10000	Mpa
thermal performance	Test Condition	Test Method	Test Result	Test Unit
thermal conductivity		DIN 52612	0.43	W/m/K
Linear coefficient of thermal expansion	MDMD	ISO 11359-2	0.000018	1/℃
Maximum operating temperature			120	°C
Maximum operating temperature	Maximum operating temperature			160	°C
Physical properties	Test Condition	Test Method	Test Result	Test Unit
density		ISO 1183	1.26	g/cm³
Shrinkage rate	MDMD	ISO 294-4	0.2	%
Shrinkage rate	Shrinkage rate	TDTD	ISO 294-4	0.5	%
Water absorption rate	23℃，24hr(23°C, 24 hr)	ISO 62	<=1.0	%
Electrical performance	Test Condition	Test Method	Test Result	Test Unit
Dissipation factor	体积电阻体积电阻		100000	Ω.cm
Dissipation factor	Dissipation factor	表面电阻表面电阻		1000	Ω.cm

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top