Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| density | | ASTM D792 | 1.19 g/cm³ |
| melt mass-flow rate | | ASTM D1238 | 20 g/10min |
| Shrinkage rate | | ASTM D955 | 0.30 % |
| Water absorption rate | | ASTM D570 | 0.36 % |
| hardness | Test Condition | Test Method | Test Result |
|---|
| Shore hardness | | ASTM D2240 | 50 |
| flammability | Test Condition | Test Method | Test Result |
|---|
| UL flame retardant rating | | UL 94 | HB |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| tensile strength | Yield | ASTM D638 | 37.0 MPa |
| elongation | Break | ASTM D638 | 420 % |
| Flexural modulus | | ASTM D790 | 118 MPa |
| Compression Modulus | | ASTM D695 | 9.00 MPa |
| Taber abraser | | ASTM D1044 | 15.0 mg |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|
| Impact strength of cantilever beam gap | | ASTM D256 | 无断裂 |
| elastomer | Test Condition | Test Method | Test Result |
|---|
| tensile strength | | ASTM D412 | 9.80 MPa |
| tear strength | | ASTM D624 | 142 kN/m |
| compression set | | ASTM D395 | 60 % |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|
| dielectric strength | | ASTM D149 | 30 kV/mm |
| Volume resistivity | | ASTM D257 | 1E+14 ohms·cm |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| Heat distortion temperature | | ASTM D648 | 50.0 °C |
| brittle temperature | | ASTM D746 | -65.0 °C |
| vicat | | ASTM D1525 | 140 °C |
| melting temperature | | DSC | 170 °C |
| Linear coefficient of thermal expansion | | ASTM D696 | 1.7E-04 cm/cm/°C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare