Share
Add to compare

HDPE HC 7260 PETROCHINA JILIN

62

Form:Granules | Grade:Injection grade

Properties:
high densityHigh hardnessHigh stiffnessLow warpage
Product Description
Certificates(0)
Datasheet

Product Description

Properties:high density | High hardness | High stiffness | Low warpage

Certificates

No Data...

Technical Data Sheet

Basic PerformanceTest ConditionTest MethodTest ResultTest Unit
densityASTM D-7920.959
melt mass-flow rate190℃/2.16kgASTM D-12388g/10min
mechanical propertiesTest ConditionTest MethodTest ResultTest Unit
Environmental stress cracking resistance50℃,2mm,100% Igepal,Compression Molded,F50ASTM D-1693B5hr
Shore hardnessShore D,15 sec,Compression MoldedASTM D-224063
tensile strengthYield,Compression MoldedASTM D-63829Mpa
elongation at yieldCompression MoldedASTM D-6387.5%
Bending modulusCompression Molded,2% SecantASTM D-7901140Mpa
Impact strength of cantilever beam gapCompression MoldedASTM D-25635J/m
thermal performanceTest ConditionTest MethodTest ResultTest Unit
Hot deformation temperature0.45MPa, Unannealed,Compression MoldedASTM D-64876°C
Vicat softening temperatureASTM D-1525126°C
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.