PPS C-2000SG15 IDEMITSU JAPAN

Form：Granules | Grade：Injection grade

Properties:

High temperature resistanFiller: Glass mineral70% filler by weight

Typical Applications:

Automotive components

Supplier(1)

Product Description

Certificates(0)

Datasheet

Product Description

Typical Applications:	Automotive components
Properties:	High temperature resistan \| Filler: Glass mineral \| 70% filler by weight

Certificates

No Data...

Technical Data Sheet

impact performance	Test Condition	Test Method	Test Result	Test Unit
Impact strength of simply supported beam without notch		ISO 179	5.7	kJ/m²
flammability	Test Condition	Test Method	Test Result	Test Unit
UL flame retardant rating	0.9mm	UL 94	V-0
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
tensile strength		ISO 527-2	89.0	Mpa
Tensile strain	Break	ISO 527-2	0.70	%
Bending modulus		ISO 178	19100	Mpa
bending strength		ISO 178	161	Mpa
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Hot deformation temperature	1.8MPa,Unannealed	ISO 75-2/A	272	°C
Linear coefficient of thermal expansion	MD	ISO 11359-2	1.9E-05	cm/cm/°C
Linear coefficient of thermal expansion	Linear coefficient of thermal expansion	TD	ISO 11359-2	2E-05	cm/cm/°C
Physical properties	Test Condition	Test Method	Test Result	Test Unit
density		ISO 1183	2.10	g/cm³
Shrinkage rate	TD	ISO 294-4	0.60	%
Shrinkage rate	Shrinkage rate	MD	ISO 294-4	0.35	%
Water absorption rate	23°C,24hr	ISO 62	0.010	%
Electrical performance	Test Condition	Test Method	Test Result	Test Unit
Dielectric constant		IEC 60250	6.50
Dissipation factor		IEC 60250	0.023
Volume resistivity		ASTM D257	1E+16	ohms·cm
Dielectric strength	1.00mm	IEC 60243-1	13	KV/mm
Dielectric strength	Dielectric strength	3.00mm	IEC 60243-1	14	KV/mm
hardness	Test Condition	Test Method	Test Result	Test Unit
Rockwell hardness	M-Sale	ISO 2039-2	93
Supplementary Information	Test Condition	Test Method	Test Result	Test Unit
Flowability2	1.00mm，Flowability	Internal Method	9.10	CM

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top