
Product Description
Certificates(0)
Datasheet
Product Description
| Typical Applications: | support | gear drive |
Certificates
No Data...
Technical Data Sheet
| Other performance | Test Condition | Test Method | Test Result | Test Unit |
|---|---|---|---|---|
| Extreme Oxygen Index | 15 | % | ||
| Loss angle | 100HZ | 10 | ||
| Basic Performance | Test Condition | Test Method | Test Result | Test Unit |
| Water absorption rate | 0.8 | % | ||
| 0.2 | % | |||
| density | 1400 | kg/cm | ||
| melt mass-flow rate | 220℃/10kg | 7.5 | CM | |
| mechanical properties | Test Condition | Test Method | Test Result | Test Unit |
| elongation | Break | 29 | % | |
| tensile strength | Yield | 63 | Mpa | |
| Tensile modulus | 2600 | Mpa | ||
| Charpy Notched Impact Strength | 23℃ | 5.5 | KJ/m | |
| 23℃ | 200 | KJ/m | ||
| elongation at yield | 9.6 | % | ||
| Tensile modulus | 1h | 1800 | Mpa | |
| thermal performance | Test Condition | Test Method | Test Result | Test Unit |
| Linear coefficient of thermal expansion | 水平方向 | 1.1 | E-4/℃ | |
| Melting temperature | 10℃/min | 167 | °C | |
| Vicat softening temperature | 50℃/h50n | 150 | °C | |
| Hot deformation temperature | 1.80MPa | 105 | °C | |
| Burning rate | 1.6mm | HB | CLASS | |
| Physical properties | Test Condition | Test Method | Test Result | Test Unit |
| Shrinkage rate | 水平方向 | 2.1 | % | |
| Electrical performance | Test Condition | Test Method | Test Result | Test Unit |
| Volume resistivity | 1E+13 | Ohm | ||
| Dielectric constant | 100HZ | 3.8 | ||
| Dielectric strength | 40 | KV/mm | ||
| Surface resistivity | 1E+13 | Ohm |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.