Technical Data Sheet
| 物理性能 | Test Condition | Test Method | Test Result |
|---|
| 密度 | | ASTMD1505 | 0.938 g/cm³ |
| 熔体质量流动速率 | 190°C/2.16kg | ASTMD1238 | 1.8 g/10min |
| 醋酸乙烯含量 | | | 18.0 wt% |
| 热性能 | Test Condition | Test Method | Test Result |
|---|
| 脆化温度 | | ASTMD746 | -70.0 °C |
| 维卡软化温度 | | ASTMD1525 | 60.0 °C |
| 熔融温度 | | | 84.0 °C |
| 光学性能 | Test Condition | Test Method | Test Result |
|---|
| 光泽度 | 45°,30.0µm,吹塑薄膜 | ASTMD2457 | 90 |
| 雾度 | 30.0µm,吹塑薄膜 | ASTMD1003 | 3.0 % |
| 机械性能 | Test Condition | Test Method | Test Result |
|---|
| 抗张强度 | 屈服 | ASTMD638 | 4.41 Mpa |
| 抗张强度 | 断裂 | ASTMD638 | 14.7 Mpa |
| 伸长率 | 断裂 | ASTMD638 | 800 % |
| 弯曲模量 | | ASTMD790 | 39.2 Mpa |
| 摩擦系数 | 吹塑薄膜 | ASTMD1894 | 0.50 |
| 薄膜 | Test Condition | Test Method | Test Result |
|---|
| 落锤冲击 | 30µm,吹塑薄膜 | ASTMD1709 | 650 g |
| 埃尔曼多夫抗撕强度 | MD:30µm,吹塑薄膜 | ASTMD1922 | 12 g |
| 埃尔曼多夫抗撕强度 | TD:30µm,吹塑薄膜 | ASTMD1922 | 29 g |
| 薄膜厚度-经测试 | | | 30 µm |
| 可供应的薄膜厚度 | | | 1.2-5.9mil(30-150µ |
| 割线模量 | 1%正割,MD:30µm,吹塑薄膜 | ASTMD882 | 34.3 Mpa |
| 割线模量 | 1%正割,TD:30µm,吹塑薄膜 | ASTMD882 | 37.3 Mpa |
| 抗张强度 | MD:屈服,30µm,吹塑薄膜 | ASTMD882 | 3.92 Mpa |
| 抗张强度 | TD:屈服,30µm,吹塑薄膜 | ASTMD882 | 2.94 Mpa |
| 抗张强度 | MD:断裂,30µm,吹塑薄膜 | ASTMD882 | 27.5 Mpa |
| 抗张强度 | TD:断裂,30µm,吹塑薄膜 | ASTMD882 | 24.5 Mpa |
| 伸长率 | MD:断裂,30µm,吹塑薄膜 | ASTMD882 | 500 % |
| 伸长率 | TD:断裂,30µm,吹塑薄膜 | ASTMD882 | 600 % |
| 硬度 | Test Condition | Test Method | Test Result |
|---|
| 肖氏硬度 | 邵氏A | ASTMD2240 | 8838 |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare
View Prices