Technical Data Sheet
| thermosetting | Test Condition | Test Method | Test Result |
|---|
| Hardener | | 按重量计算的混合比:100,按容量计算的混合比:100 |
| Pot Life | | 3.0 min |
| Thermosetting mixed viscosity | | ASTMD2393 | 190 cP |
| stripping time | | | 30到60 min |
| Resin | | 按重量计算的混合比:100,按容量计算的混合比:100 |
| physical property | Test Condition | Test Method | Test Result |
|---|
| density | | ASTMD792 | 1.09 g/cm³ |
| Shrinkage rate | | ASTMD955 | 0.25 % |
| hardness | Test Condition | Test Method | Test Result |
|---|
| | ASTMD2240 | 75 |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| tensile strength | Ultimate | ASTMD638 | 36.7 MPa |
| elongation | Break | ASTMD638 | 13 % |
| Flexural modulus | | ASTMD790 | 1730 MPa |
| bending strength | Break | ASTMD790 | 60.5 MPa |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|
| Impact strength of cantilever beam gap | | ASTMD256 | 72 J/m |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| | ASTMD648 | 62.8 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare