Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| density | | g/cm³ | 1.64 -- |
| Shrinkage rate | | % | 0.40到1.0 -- |
| Water absorption rate | | % | 0.60 -- |
| hardness | Test Condition | Test Method | Test Result |
|---|
| Rockwell hardness | R-Scale | | 120 -- |
| flammability | Test Condition | Test Method | Test Result |
|---|
| UL flame retardant rating | | | V-0 -- |
| Supplementary Information | Test Condition | Test Method | Test Result |
|---|
| ConditionedMoistureContent | | % | -- 1.3 |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| tensile strength | | MPa | 142 113 |
| elongation | Break | % | 5.0 5.0 |
| Flexural modulus | | MPa | 8630 6370 |
| bending strength | | MPa | 200 157 |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|
| Impact strength of cantilever beam gap | | J/m | 98 120 |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|
| dielectric strength | | kV/mm | 25 -- |
| arc resistance | | sec | 70.0 -- |
| Volume resistivity | | ohms·cm | 8E+14 -- |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| | °C | 230 -- |
| vicat | | °C | 240 -- |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare