
PC/ABS 7590 STYRON TAIWAN
150
Form:Granules | Grade:Injection grade
Properties:
Bromine freeChlorine freeFlame retardant
Typical Applications:
TVTool handleShellElectronic fieldElectrical fieldElectrical enclosureElectrical/Electronic Applications
Product Description
Certificates(0)
Datasheet
Product Description
| Typical Applications: | TV | Tool handle | Shell | Electronic field | Electrical field | Electrical enclosure | Electrical/Electronic Applications |
| Properties: | Bromine free | Chlorine free | Flame retardant |
Certificates
No Data...
Technical Data Sheet
| flammability | Test Condition | Test Method | Test Result | Test Unit |
|---|---|---|---|---|
| Extreme Oxygen Index | ASTM D2863 | 29 | % | |
| UL flame retardant rating | 1.5mm | UL 94 | V-0 | |
| mechanical properties | Test Condition | Test Method | Test Result | Test Unit |
| bending strength | 3.20mm,InjectionMolded | ASTM D790 | 97.9 | Mpa |
| Bending modulus | 3.20mm,InjectionMolded | ASTM D790 | 2830 | Mpa |
| Tensile strain | Break,3.20mm,InjectionMolded | ASTM D638 | 50 | % |
| Yield,3.20mm,InjectionMolded | ASTM D638 | 4.0 | % | |
| tensile strength | Break,3.20mm,InjectionMolded | ASTM D638 | 46.2 | Mpa |
| Yield,3.20mm,InjectionMolded | ASTM D638 | 62.1 | Mpa | |
| thermal performance | Test Condition | Test Method | Test Result | Test Unit |
| Vicat softening temperature | ASTM D15252 | 108 | °C | |
| Hot deformation temperature | 1.8MPa,Unannealed | ASTM D648 | 82.2 | °C |
| 0.45MPa,Unannealed | ASTM D648 | 93.9 | °C | |
| Physical properties | Test Condition | Test Method | Test Result | Test Unit |
| Shrinkage rate | MD | ASTM D955 | 0.40-0.60 | % |
| melt mass-flow rate | 260°C/5.0kg | ASTM D1238 | 75 | g/10min |
| 230°C/3.8kg | ASTM D1238 | 17 | g/10min |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.