Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| density | | ISO 1183 | 1.09to1.13 g/cm³ |
| melt mass-flow rate | | ASTM D1238 | 45to70 g/10min |
| hardness | Test Condition | Test Method | Test Result |
|---|
| Shore hardness | | ISO 868 | 84to88 |
| flammability | Test Condition | Test Method | Test Result |
|---|
| UL flame retardant rating | | UL 94 | V-2 |
| Limiting Oxygen Index | | ISO 4589-2 | 24to27 % |
| Supplementary Information | Test Condition | Test Method | Test Result |
|---|
| Resistance Against Saponification | | HD22.10S1 | <200 mgKOH/g |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| tensile strength | Yield | ISO 527-2 | 38.7to47.3 MPa |
| Tensile strain | Break | ISO 527-2 | 580to700 % |
| wear resistance | | DIN 53516 | 33.3to36.8 mm³ |
| elastomer | Test Condition | Test Method | Test Result |
|---|
| tear strength | | DIN 53515 | 61.8to68.3 kN/m |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| brittle temperature | | ISO 458 | -24.0--20.0 °C |
| Usage temperature | | ISO 1183 | 80 °C |
| thermal stability | | ISO R182 | >80 |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare