PA66 6210GC HUIZHOU NPC

204

Form：Granules | Grade：Injection grade

Properties:

Glass fiber reinforcedHigh rigidityThermal stability15% glass fiber reinforce

Typical Applications:

Electrical fieldElectronic fieldplugHigh rigidity heat-resistant injection moldingSuch as circuit breakers electrical box casings

Supplier(1)

Product Description

Certificates(1)

Datasheet

Product Description

Typical Applications:	Electrical field \| Electronic field \| plug \| High rigidity \| heat-resistant injection molding \| Such as circuit breakers \| electrical box casings \|
Properties:	Glass fiber reinforced \| High rigidity \| Thermal stability \| 15% glass fiber reinforce

Certificates

Technical Data Sheet

other	Test Condition	Test Method	Test Result	Test Unit
melt mass-flow rate		ASTM D1238	30	g/10min
Shrinkage rate	3mm	ASTM D955	0.3-0.8	%
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
Impact strength of cantilever beam gap	3.2mm	ASTM D256	7	kg.cm/cm
Bending modulus		ASTM D790	48000	kg/cm2
tensile strength		ASTM D638	1200	kg/cm2
Physical properties	Test Condition	Test Method	Test Result	Test Unit
Water absorption rate	23℃	ASTM D570	1.0	%
density		ASTM D792	1.22	--

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top