PP GLS PP ZT89
0
- Properties:Fillermineral filler40%filler by weight
CompareTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| density | ASTMD792 | 1.22到1.24 g/cm³ | |
| melt mass-flow rate | ASTMD1238 | >5.0 g/10min | |
| ASTMD1238 | >5.0 g/10min | ||
| density | ASTMD792 | 1.22到1.24 g/cm³ |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Flexural modulus | ASTMD790 | 3000到3400 MPa | |
| bending strength | ASTMD790 | 45.0到50.0 MPa | |
| tensile strength | ASTMD638 | 30.0到34.0 MPa | |
| elongation | Break | ASTMD638 | >10 % |
| tensile strength | ASTMD638 | 30.0到34.0 MPa | |
| elongation | Break | ASTMD638 | >10 % |
| Flexural modulus | ASTMD790 | 3000到3400 MPa | |
| bending strength | ASTMD790 | 45.0到50.0 MPa |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Impact strength of cantilever beam gap | ASTMD256 | 30到40 J/m | |
| ASTMD256 | 30到40 J/m |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| ASTMD648 | 78.0到82.0 °C | ||
| ASTMD648 | 78.0到82.0 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top