HDPE M 5214
0
- Properties:Acceptable in contact with foodhigh glossand good demolding performance
- Usages:bottle
CompareTechnical Data Sheet
| Basic performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| density | ASTM D-1505 | 0.952 g/cm | |
| melt mass-flow rate | ASTM D-1238 | 1.6 g/10min |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| hardness | ASTM D-2240 | 67 | |
| Yield tensile strength | ASTM D-638 | 25.9 MPa | |
| elongation | Break | ASTM D-638 | 600 % |
| Flexural modulus | ASTM D-790 | 1160 MPa |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| brittle temperature | ASTM D-746 | -76 ℃ | |
| vicat | ASTM D-1525 | 128 ℃ |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top