PPS HONES® PPS HS-G30 Guangdong Shunde Hones Polymer Material Co., Ltd.

0
  • Properties:
    Fillers
    glass fiber reinforced materials

Technical Data Sheet

physical property Test ConditionTest MethodTest Result
density内部方法1.57 g/cm³
Shrinkage rate内部方法0.35 %
Shrinkage rate内部方法0.65 %
Water absorption rateISO 620.010 %
flammabilityTest ConditionTest MethodTest Result
UL flame retardant ratingUL 94V-0
Filling analysisTest ConditionTest MethodTest Result
MeltViscosityISO 11443240 Pa·s
Mechanical propertiesTest ConditionTest MethodTest Result
bending strength内部方法185 MPa
tensile strength 内部方法110 MPa
elongationBreak内部方法1.4 %
Flexural modulus内部方法6000 MPa
Electrical performanceTest ConditionTest MethodTest Result
Surface ResistivityIEC 600938E+16 ohms
Volume resistivityIEC 600938E+15 ohms·cm
dielectric strengthIEC 60243-115 kV/mm
dielectric constantIEC 602504.20
dielectric constantIEC 602504.20
Dissipation FactorIEC 602501E-03
Dissipation FactorIEC 602502E-03
Compared to the Leakage Tracking Index (CTI)IEC 60112PLC 4
Thermal performanceTest ConditionTest MethodTest Result
Heat distortion temperature内部方法260 °C
Linear coefficient of thermal expansionISO 11359-22E-05 cm/cm/°C
Linear coefficient of thermal expansionISO 11359-24E-05 cm/cm/°C
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Contact Us

Get App

Top