POM Homopolymer DynaMix™ 1830MBH Polymer Dynamix

Product Description

Certificates(0)

Datasheet

Product Description

Certificates

No Data...

Technical Data Sheet

impact performance	Test Condition	Test Method	Test Result	Test Unit
Impact strength of cantilever beam gap	23℃	J/m	0.011to0.024
Suspended wall beam without notch impact strength	23℃	J/m	0.011to0.150
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
Tensile modulus	23℃		4655.17to11034.48	Mpa
yield			59.31to68.07	Mpa
crack			53.72to70.34	Mpa
Bending modulus	23℃		3000.0to7586.21	Mpa
elongation	Break,23℃	%	2.6to4.2
bending strength	23℃		69.66to197.93	Mpa
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Melting temperature		°C	175to177
Linear coefficient of thermal expansion	MD	mm/mm/°C	66.0E-5到101.6E-5
Physical properties	Test Condition	Test Method	Test Result	Test Unit
flow		mm/mm	76.2E-3-0.432
Water absorption rate	23℃,24hr	%	0.18to0.90
density			1.47to1.63
Electrical performance	Test Condition	Test Method	Test Result	Test Unit
Dielectric strength	23℃	V/mil	410
Volume resistivity	23℃	ohms·cm	1.0E+14到1.0E+16
hardness	Test Condition	Test Method	Test Result	Test Unit
Rockwell hardness	23℃		82to120

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top