AS(SAN) RTP 503 HB
0
- Properties:Fillerglass fiber reinforced material20%filler by weight
CompareTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| density | ASTMD792 | 1.20 g/cm³ | |
| Shrinkage rate | ASTMD955 | 0.20到0.35 % |
| flammability | Test Condition | Test Method | Test Result |
|---|---|---|---|
| UL flame retardant rating | UL94 | HB |
| Supplementary Information | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Primary Additive | 20 % |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Tensile modulus | ASTMD638 | 7580 MPa | |
| tensile strength | ASTMD638 | 107 MPa | |
| elongation | Yield | ASTMD638 | 1.0到2.0 % |
| Flexural modulus | ASTMD790 | 7580 MPa | |
| bending strength | ASTMD790 | 145 MPa |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Impact strength of cantilever beam gap | ASTMD256 | 48 J/m | |
| Suspended wall beam without notch impact strength | ASTMD4812 | 240 J/m |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top