Share
Add to compare

Phenolic PF 4136 Hexion Inc.

Product Description
Certificates(0)
Datasheet

Product Description

Certificates

No Data...

Technical Data Sheet

impact performanceTest ConditionTest MethodTest ResultTest Unit
Charpy Notched Impact Strength23°CISO 179/1eA3.5kJ/m²
Impact strength of simply supported beam without notch23°CISO 179/1eU9.5kJ/m²
mechanical propertiesTest ConditionTest MethodTest ResultTest Unit
Bending modulusISO 17815500MPa
bending strengthISO 178135MPa
Compressive stressISO 604250MPa
Tensile modulusISO 527-2/113000MPa
tensile strengthISO 527-2/570.0MPa
thermal performanceTest ConditionTest MethodTest ResultTest Unit
Hot deformation temperature8.0MPa,UnannealedISO 75-2/C165°C
Physical propertiesTest ConditionTest MethodTest ResultTest Unit
density23°CISO 11831.83g/cm³
Apparent densityISO 600.80g/cm³
Shrinkage rateISO 25770.10%
Shrinkage rateISO 25770.15%
Water absorption rateISO 6210.0mg
Electrical performanceTest ConditionTest MethodTest ResultTest Unit
Volume resistivityIEC 600931E+12ohms·cm
Dielectric strength1.00mmIEC 60243-133kV/mm
Relative permittivity100HzIEC 602507.50
Dissipation factor100HzIEC 602500.050
Compared to the anti leakage trace indexSolutionAIEC 60112PLC 3
Surface resistivityIEC 600931E+11ohms
Supplementary InformationTest ConditionTest MethodTest ResultTest Unit
Compression molding pressure>15.0MPa
Compression molding temperature160to190°C
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.