impact performance	Test Condition	Test Method	Test Result	Test Unit
Impact strength of cantilever beam gap		ASTM D256	>39	J/m
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
tensile strength		ASTM D638	50.0to60.0	Mpa
elongation	Break	ASTM D638	>150	%
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Melting temperature		Q/KHS001	>222	°C
Physical properties	Test Condition	Test Method	Test Result	Test Unit
density		ASTM D792	1.30-1.32	g/cm³
melt mass-flow rate	250°C/2.16kg	ASTM D1238	23to30	g/10min
Color B		Q/KHS001	1.00to3.00
Color L		Q/KHS001	>95.0
ParticleMass		Q/KHS001	1.90to2.10	g/100pcs
Intrinsic viscosity		Q/KHS001	0.99to1.0	dl/g
water content		Q/KHS001	<0.20	wt%
ash content		Q/KHS001	<300	mg/kg
Electrical performance	Test Condition	Test Method	Test Result	Test Unit
Dielectric strength	2.00mm	ASTM D149	>20	KV/mm
Supplementary Information	Test Condition	Test Method	Test Result	Test Unit
Terminal carboxyl content		Q/KHS001	<24.0	mol/t

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top