POM 500AF NC010 DUPONT USA

Form：Granules

Typical Applications:

Automotive sectorEngine partsFitness equipmentCam

Supplier(1)

Product Description

Certificates(0)

Datasheet

Product Description

Typical Applications:

Automotive sector | Engine parts | Fitness equipment | Cam

Certificates

No Data...

Technical Data Sheet

impact performance	Test Condition	Test Method	Test Result	Test Unit
Charpy Notched Impact Strength	-30°C	ISO 179/1eA	3.0	kJ/m²
Charpy Notched Impact Strength	Charpy Notched Impact Strength	23°C	ISO 179/1eA	3.0	kJ/m²
Impact strength of simply supported beam without notch	-30°C	ISO 179/1eU	35	kJ/m²
Impact strength of simply supported beam without notch	Impact strength of simply supported beam without notch	23°C	ISO 179/1eU	40	kJ/m²
Impact strength of cantilever beam gap	23°C	ISO 180/1A	3.0	kJ/m²
flammability	Test Condition	Test Method	Test Result	Test Unit
Burning rate	1.00mm	ISO 3795	<100	mm/min
UL flame retardant rating	1.5mm	UL 94	HB
	UL flame retardant rating	3.0mm	UL 94	HB
		UL flame retardant rating	1.5mm	IEC 60695-11-10,-20	HB
		UL flame retardant rating	UL flame retardant rating	3.0mm	IEC 60695-11-10,-20	HB
FMVSS flammability		FMVSS302	B
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
Tensile modulus		ISO 527-2	2800	Mpa
tensile strength	Break	ISO 527-2	50.0	Mpa
Tensile strain	Break	ISO 527-2	10	%
Bending modulus		ISO 178	2500	Mpa
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Hot deformation temperature	0.45MPa,Unannealed	ISO 75-2/B	160	°C
Hot deformation temperature	Hot deformation temperature	1.8MPa,Unannealed	ISO 75-2/A	92.0	°C
Melting temperature		ISO 11357-3	178	°C
Linear coefficient of thermal expansion	MD	ISO 11359-2	1.1E-04	cm/cm/°C
Linear coefficient of thermal expansion	Linear coefficient of thermal expansion	TD	ISO 11359-2	1E-04	cm/cm/°C
AnnealingTemperature			160	°C
AnnealingTime-Optional			30.0	min/mm
Physical properties	Test Condition	Test Method	Test Result	Test Unit
density		ISO 1183	1.53	g/cm³
Shrinkage rate	TD	ISO 294-4	1.4	%
Shrinkage rate	Shrinkage rate	MD	ISO 294-4	2.0	%
Water absorption rate	Saturation,23°C,2.00mm	ISO 62	1.0	%
MediumDensity			1.28	g/cm³
Water absorption rate	Equilibrium,23°C,2.00mm,50%RH	ISO 62	0.20	%
Electrical performance	Test Condition	Test Method	Test Result	Test Unit
Compared to the anti leakage trace index		IEC 60112	PLC 0
Surface resistivity		IEC 60093	>1.0E+15	ohms
hardness	Test Condition	Test Method	Test Result	Test Unit
Rockwell hardness	M-Sale	ISO 2039-2	83
Rockwell hardness	Rockwell hardness	R-Sale	ISO 2039-2	119

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top