Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| density | | | 1.22 g/cm³ |
| Shrinkage rate | | | 1.5 % |
| hardness | Test Condition | Test Method | Test Result |
|---|
| Shore A | | 80 |
| | | 32 |
| Supplementary Information | Test Condition | Test Method | Test Result |
|---|
| BayshoreResistance-NBSIndex | | | 38.0 |
| PenetrationDepth-Recommendedforoptimumlife | | | 35 % |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| Steel - Dynamic | | 0.80 |
| Wear resistance - NBSIdex | | | 110 |
| elastomer | Test Condition | Test Method | Test Result |
|---|
| Tensile stress | | | 4.24 MPa |
| Tensile stress | | | 8.00 MPa |
| Tensile stress | | | 45.5 MPa |
| Tensile stress | | | 650 % |
| tear strength | Split | ASTMD470 | 22 kN/m |
| compression set | | | 38 % |
| film | Test Condition | Test Method | Test Result |
|---|
| GravesTear | | | 78.8 kN/m |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| brittle temperature | | | -67.8 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare