PA66 70G30HSLR NC010 DUPONT USA

Form：Granules | Grade：Wear resistant grade

Properties:

Thermal stabilityLubricityHydrolysis resistance

Typical Applications:

Electrical fieldElectronic fieldFitness equipmentAutomotive sectorElectrical appliances

Supplier(1)

Product Description

Certificates(0)

Datasheet

Product Description

Typical Applications:	Electrical field \| Electronic field \| Fitness equipment \| Automotive sector \| Electrical appliances
Properties:	Thermal stability \| Lubricity \| Hydrolysis resistance

Certificates

No Data...

Technical Data Sheet

impact performance	Test Condition	Test Method	Test Result	Test Unit
Impact strength of simply supported beam without notch	-30°C	ISO 179/1eU	70	kJ/m²
Impact strength of simply supported beam without notch	Impact strength of simply supported beam without notch	23°C	ISO 179/1eU	80	kJ/m²
flammability	Test Condition	Test Method	Test Result	Test Unit
Burning rate	1.00mm	ISO 3795	24	mm/min
UL flame retardant rating	0.75mm	UL 94	HB
	UL flame retardant rating	1.5mm	UL 94	HB
		UL flame retardant rating	0.75mm	IEC 60695-11-10,-20	HB
		UL flame retardant rating	UL flame retardant rating	1.5mm	IEC 60695-11-10,-20	HB
Extreme Oxygen Index		ISO 4589-2	24	%
FMVSS flammability		FMVSS302	SE/B
Atomization	F-value(refraction)	ISO 6452	95	%
Atomization	Atomization	G-value(condensate)	ISO 6452	3E-04	g
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
Tensile creep modulus	1hr	ISO 899-1	--	Mpa
Tensile creep modulus	Tensile creep modulus	1000hr	ISO 899-1	--	Mpa
Tensile modulus		ISO 527-2	10000	Mpa
tensile strength	Break	ISO 527-2	200	Mpa
Tensile strain	Break	ISO 527-2	3.3	%
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Glass transition temperature		ISO 11357-2	80.0	°C
Vicat softening temperature		ISO 306/B50	250	°C
Melting temperature		ISO 11357-3	262	°C
Linear coefficient of thermal expansion	MD：--	ISO 11359-2	2.6E-05	cm/cm/°C
	Linear coefficient of thermal expansion	MD：-40to23°C	ISO 11359-2	2.6E-05	cm/cm/°C
		Linear coefficient of thermal expansion	MD：55to160°C	ISO 11359-2	1.3E-05	cm/cm/°C
			Linear coefficient of thermal expansion	TD：--	ISO 11359-2	8E-05	cm/cm/°C
				Linear coefficient of thermal expansion	TD：-40to23°C	ISO 11359-2	7E-05	cm/cm/°C
					Linear coefficient of thermal expansion	TD：55to160°C	ISO 11359-2	1.3E-04	cm/cm/°C
					Linear coefficient of thermal expansion	Linear coefficient of thermal expansion	TD：EffectiveThermalDiffusivity	ISO 11359-2	1.1E-07	m²/s
Hot deformation temperature	0.45MPa,Unannealed	ISO 75-2/B	261	°C
Hot deformation temperature	Hot deformation temperature	1.8MPa,Unannealed	ISO 75-2/A	253	°C
Physical properties	Test Condition	Test Method	Test Result	Test Unit
Top out temperature			210	°C
SpecificHeatCapacity of Melt			2290	J/kg/°C
ThermalConductivityofMelt			0.21	W/m/K
MediumDensity			1.20	g/cm³
Shrinkage rate	TD	ISO 294-4	1.1	%
Shrinkage rate	Shrinkage rate	MD	ISO 294-4	0.30	%
Water absorption rate	Saturation,23°C,2.00mm	ISO 62	6.0	%
Water absorption rate	Water absorption rate	Equilibrium,23°C,2.00mm,50%RH	ISO 62	1.9	%
Electrical performance	Test Condition	Test Method	Test Result	Test Unit
Surface resistivity		IEC 60093	--	ohms
Volume resistivity		IEC 60093	>1.0E+15	ohms·cm
Dielectric strength		IEC 60243-1	38	KV/mm
Relative permittivity	100Hz	IEC 60250	4.30
Relative permittivity	Relative permittivity	1MHz	IEC 60250	4.10
Dissipation factor	100Hz	IEC 60250	7E-03
Dissipation factor	Dissipation factor	1MHz	IEC 60250	0.015
Compared to the anti leakage trace index	3.00mm	UL 746	PLC 1
Compared to the anti leakage trace index	Compared to the anti leakage trace index		IEC 60112	PLC 1
Supplementary Information	Test Condition	Test Method	Test Result	Test Unit
EmissionofOrganicCompounds		VDA277	3.20	µgC/g
Odor		VDA270	4.50

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top