POM H2320-004 BASF KOREA

Form：Granules | Grade：Injection grade

Properties:

high molecular weightUltral&reg

Typical Applications:

Thick walled components

Supplier(1)

Product Description

Certificates(0)

Datasheet

Product Description

Typical Applications:	Thick walled components
Properties:	high molecular weight \| Ultral&reg

Certificates

No Data...

Technical Data Sheet

machinability	Test Condition	Test Method	Test Result	Test Unit
Processing temperature			374-446	℉
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
Impact strength of simply supported beam without notch	-22℉	ISO 179	99.9	ft·lb/in
Charpy Notched Impact Strength	73℉	ISO 179	2.86	ft·lb/in
Charpy Notched Impact Strength	Charpy Notched Impact Strength	-22℉	ISO 179	2.62	ft·lb/in
Tensile creep modulus	1000h	ISO 899-1	189000	psi
Tensile strain	73℉，Yield	ISO 527-1	11	%
Tensile stress	73℉	ISO 527-1	9280	psi
Tensile modulus	73℉	ISO 527-1	377000	psi
Impact strength of simply supported beam without notch	73℉	ISO 179	119	ft·lb/in
thermal performance	Test Condition	Test Method	Test Result	Test Unit
UL flame retardant rating		UL 94	HB
Hot deformation temperature	1.80MPa	ISO 75A-1	203	℉
Physical properties	Test Condition	Test Method	Test Result	Test Unit
Water absorption rate	23C/50RH	ISO 62	0.2	%
Electrical performance	Test Condition	Test Method	Test Result	Test Unit
Dielectric loss	1E+6HZ，73℉	IEC 60250	0.00500
Volume resistivity		IEC 60093	1E+15	ohm·cm
Volume resistivity	Volume resistivity		IEC 60093	1E+13	ohms

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top