PE Copolymer SI-LINK™ DFDA-6451 NT
0
CompareTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| density | ASTM D1505 | 0.922 g/cm³ | |
| melt mass-flow rate | ASTM D1238 | 1.5 g/10min |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| tensile strength | ASTM D638 | 16.5 MPa | |
| elongation | Break | ASTM D638 | 350 % |
| aging | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Change rate of tensile strength in air | ASTM D638 | 90 % | |
| Elongation retention rate | ASTM D638 | 95 % |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| dielectric constant | ASTM D150 | 2.30 | |
| Loss factor | ASTM D150 | 2.5E-04 rad |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| thermal creep | ICEAT-28-562 | 100 % |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top