Technical Data Sheet
| optical performance | Test Condition | Test Method | Test Result |
|---|
| refractive index | | ISO 489 | 1.53 |
| Basic performance | Test Condition | Test Method | Test Result |
|---|
| density | | ISO 1183 | 1.02 g/cm |
| melt mass-flow rate | | ISO 1133 | 14 cm |
| Water absorption rate | | ISO 62 | 0.01 % |
| Other performance | Test Condition | Test Method | Test Result |
|---|
| UL flame retardant rating | | | UL 94 HB |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| Tensile modulus | | ISO 527-2/1A/1 | 2900 MPa |
| Tensile fracture stress | | ISO 527-2/1A/5 | 63 MPa |
| Tensile fracture strain | | ISO 527-2/1A/5 | 2.7 % |
| Charpy notch impact strength | | ISO 179/1eA | 1.8 KJ/m |
| Charpy without notch impact strength | | ISO 179/1eU | 15 KJ/m |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|
| Volume resistivity | | ohm·cm | IEC 60093 1E+16 |
| Volume resistivity | | ohm·m | IEC 60093 >1E+13 |
| dielectric constant | | | IEC 60250 2.35 |
| dielectric constant | | | IEC 60250 2.35 |
| dielectric constant | | | IEC 60250 2.3 |
| dielectric constant | | | IEC 60250 2.35 |
| Loss factor | | | IEC 60250 0.00007 |
| Comparative Tracking Index | | V | IEC 60112 600 |
| Comparative Tracking Index | | | IEC 60112 600 |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| | ISO 75-2/B | 130 ℃ |
| glass transition temperature | | ℃ | DSC 140 |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare
View Prices