
PPS OC-1004 EM SABIC INNOVATIVE US
128
Form:Granules | Grade:Injection grade
Properties:
Flame retardantFiller: Carbon fiber rein
Typical Applications:
Electronic and electrical components
Product Description
Certificates(0)
Datasheet
Product Description
| Typical Applications: | Electronic and electrical components |
| Properties: | Flame retardant | Filler: Carbon fiber rein |
Certificates
No Data...
Technical Data Sheet
| impact performance | Test Condition | Test Method | Test Result | Test Unit |
|---|---|---|---|---|
| Suspended wall beam without notch impact strength | 23°C | ISO 180/1U | 25 | kJ/m² |
| Impact strength of cantilever beam gap | 23°C | ISO 180/1A | 5.0 | kJ/m² |
| flammability | Test Condition | Test Method | Test Result | Test Unit |
| UL flame retardant rating | 1.50mm | UL 94 | V-0 | |
| mechanical properties | Test Condition | Test Method | Test Result | Test Unit |
| Tensile modulus | ISO 527-2/1 | 21600 | Mpa | |
| bending strength | ISO 178 | 242 | Mpa | |
| Bending modulus | ISO 178 | 15700 | Mpa | |
| Tensile strain | Break | ISO 527-2/5 | 1.1 | % |
| tensile strength | Yield | ISO 527-2/5 | 185 | Mpa |
| thermal performance | Test Condition | Test Method | Test Result | Test Unit |
| Linear coefficient of thermal expansion | TD:23to60°C | ISO 11359-2 | 5E-05 | cm/cm/°C |
| MD:23to60°C | ISO 11359-2 | 1.1E-05 | cm/cm/°C | |
| 1.8MPa, unannealed, 64.0mm span of | ISO 75-2/Af | 256 | °C | |
| 0.45MPa, unannealed, 64.0mm span | ISO 75-2/Bf | 277 | °C | |
| Physical properties | Test Condition | Test Method | Test Result | Test Unit |
| Water absorption rate | 23°C,24hr | ISO 62 | 0.040 | % |
| Shrinkage rate | MD | Internal Method | 0.10-0.30 | % |
| Electrical performance | Test Condition | Test Method | Test Result | Test Unit |
| Surface resistivity | ASTM D257 | 10-1.0E+4 | ohms |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.