Technical Data Sheet
| thermosetting | Test Condition | Test Method | Test Result |
|---|
| | | 38000 cP |
| | | 按重量计算的混合比:100 |
| | | 按重量计算的混合比:16 |
| | | 30到40 min |
| physical property | Test Condition | Test Method | Test Result |
|---|
| density | | | 1.30 g/cm³ |
| hardness | Test Condition | Test Method | Test Result |
|---|
| | | 87 |
| Supplementary Information | Test Condition | Test Method | Test Result |
|---|
| CureTime | | | 1.0 day |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| tensile strength | | | 338 MPa |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|
| Impact strength of cantilever beam gap | | | 25 J/m |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| Service | | | 118 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare