Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| density | | | 1.12 g/cm³ |
| | | 520 mPa·s |
| hardness | Test Condition | Test Method | Test Result |
|---|
| | | 84 |
| Supplementary Information | Test Condition | Test Method | Test Result |
|---|
| CriticalExposure | | | 18.0 mJ/cm² |
| PenetrationDepth | | | 180.0 µm |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| Tensile modulus | | | 2730 MPa |
| tensile strength | | | 60.0 MPa |
| elongation | Break | | 5.0到8.0 % |
| Flexural modulus | | | 2710 MPa |
| bending strength | | | 98.0 MPa |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|
| Impact strength of cantilever beam gap | | | 37 J/m |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| | | 54.0 °C |
| | | 59.0 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare