
Product Description
Certificates(0)
Datasheet
Product Description
Certificates
No Data...
Technical Data Sheet
| mechanical properties | Test Condition | Test Method | Test Result | Test Unit |
|---|---|---|---|---|
| Bending modulus | 2.00mm,Compression Molded | ISO 178 | 550 | Mpa |
| Tensile modulus | 2.00mm,Compression Molded | ISO 527-2 | 580 | Mpa |
| tensile strength | Yield,2.00mm,Compression Molded | ISO 527-2/50 | 16.5 | Mpa |
| Break,2.00mm,Compression Molded | ISO 527-2/50 | 34.0 | Mpa | |
| Tensile strain | Yield,2.00mm,Compression Molded | ISO 527-2/50 | 13 | % |
| Break,2.00mm,Compression Molded | ISO 527-2/50 | >800 | % | |
| thermal performance | Test Condition | Test Method | Test Result | Test Unit |
| Vicat softening temperature | ASTM D1525 | 122 | °C | |
| Linear coefficient of thermal expansion | MD:20to70°C | DIN 53752 | 2E-04 | cm/cm/°C |
| thermal conductivity | 60°C | DIN 52612 | 0.40 | W/m/K |
| Physical properties | Test Condition | Test Method | Test Result | Test Unit |
| melt mass-flow rate | 190°C/2.16kg | ISO 1133 | 0.70 | g/10min |
| 190°C/5.0kg | ISO 1133 | 2.2 | g/10min | |
| Environmental stress cracking resistance | 50°C,10%Antarox | ISO 180 | >8760 | hr |
| hardness | Test Condition | Test Method | Test Result | Test Unit |
| Shore hardness | ShoreD,2.00mm,Compression Molded | ISO 868 | 53 |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.