SMMA Styrilic Grade 2020
0
- Properties:Impact performance
CompareTechnical Data Sheet
| Test Condition | Test Method | Test Result | |
|---|---|---|---|
| Impact strength of cantilever beam gap | ASTMD256 | 32 J/m | |
| ASTMD648 | 92.2 °C | ||
| vicat | ASTMD1525 | 104 °C | |
| refractive index | ASTMD542 | 1.570 | |
| transmissivity | ASTMD1003 | 92.8 % | |
| Haze ratio | ASTMD1003 | <0.50 % | |
| density | ASTMD792 | 1.08 g/cm³ | |
| melt mass-flow rate | ASTMD1238 | 2.2 g/10min | |
| Shrinkage rate | ASTMD955 | 0.30到0.60 % | |
| Water absorption rate | ASTMD570 | 0.10 % | |
| Tensile modulus | ASTMD638 | 2900 MPa | |
| tensile strength | Yield | ASTMD638 | 63.4 MPa |
| elongation | Break | ASTMD638 | 3.0 % |
| Flexural modulus | ASTMD790 | 3310 MPa | |
| bending strength | ASTMD790 | 100 MPa |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top