ABS/PC CYCOLOY™ XCY630L-BK1566U
546
Compare
View PricesTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| melt mass-flow rate | ASTM D1238 | 26 g/10min | |
| Melt volume flow rate | ISO 1133 | 22.0 cm3/10min | |
| Shrinkage rate | 内部方法 | 0.50-0.70 % | |
| 内部方法 | 0.50-0.70 % | ||
| Water absorption rate | ISO 62 | 0.40 % | |
| ISO 62 | 0.15 % | ||
| MeltViscosity | ISO 11443 | 170 Pa·s |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Tensile modulus | ASTM D638 | 2300 Mpa | |
| ISO 527-2/1 | 2250 Mpa | ||
| tensile strength | ASTM D638 | 54.0 Mpa | |
| elongation | ASTM D638 | 4.5 % | |
| Tensile strain | ISO 527-2/50 | 4.5 % | |
| elongation | ASTM D638 | 120 % | |
| Tensile strain | ISO 527-2/50 | 120 % | |
| Flexural modulus | ASTM D790 | 2300 Mpa | |
| ISO 178 | 2200 Mpa | ||
| bending strength | ISO 178 | 82.0 Mpa | |
| ASTM D790 | 89.0 Mpa | ||
| tensile strength | ISO 527-2/50 | 54.0 Mpa | |
| ASTM D638 | 53.0 Mpa | ||
| ISO 527-2/50 | 53.0 Mpa |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Charpy Notched Impact Strength | ISO 179/1eA | 30 kJ/m² | |
| ISO 179/1eA | 65 kJ/m² | ||
| Impact strength of cantilever beam gap | ISO 180/1A | 30 kJ/m² | |
| ISO 180/1A | 65 kJ/m² | ||
| Dart impact | ASTM D3763 | 67.0 J | |
| ASTM D3763 | 55.0 J |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Surface Resistivity | IEC 60093 | >1.0E+15 ohms | |
| Volume resistivity | IEC 60093 | >1.0E+15 ohms·cm | |
| dielectric strength | IEC 60243-1 | 35 KV/mm | |
| IEC 60243-1 | 25 KV/mm | ||
| IEC 60243-1 | 17 KV/mm |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| vicat | ISO 306/B50 | 126 °C | |
| ISO 306/B120 | 127 °C | ||
| ball-indentation hardness | IEC 60695-10-2 | Pass | |
| Linear coefficient of thermal expansion | ASTME831 | 7E-05 cm/cm/°C | |
| ISO 11359-2 | 8E-05 cm/cm/°C | ||
| Heat distortion temperature | ISO 75-2/Bf | 126 °C | |
| ASTM D648 | 107 °C | ||
| ISO 75-2/Af | 105 °C | ||
| vicat | ASTM D152510 | 126 °C | |
| Linear coefficient of thermal expansion | ASTME831 | 7E-05 cm/cm/°C | |
| ISO 11359-2 | 8E-05 cm/cm/°C | ||
| thermal conductivity | ISO 8302 | 0.20 W/m/K |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top