HIPS MA5210
0
- Properties:High impact resistanceheat distortion resistancewear resistanceand good injection molding performance
- Usages:Products with fast molding and good wear resistancesuch as televisionsair conditionersaudio systemsvideo tape casingssmall instrumentshousehold and office suppliesetc
CompareTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| density | D792 | 1.03 g/cm3 | |
| melt mass-flow rate | D1238 | 4 g/10min |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Notch impact strength | D256 | 96 J/m | |
| D256 | 117 J/m | ||
| tensile yield strength | D638 | 32 MPa | |
| tensile breaking strength | D638 | 28 MPa | |
| tensile elongation at break | D638 | 50 % | |
| Tensile modulus | D638 | 2270 MPa | |
| Flexural modulus | D790 | 2270 MPa |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| vicat | D1525 | 103 ℃ | |
| flammability | UL 94 | HB |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top