Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| density | | ASTMD792 | 1.05到1.07 g/cm³ |
| thermosetting | Test Condition | Test Method | Test Result |
|---|
| Thermosetting mixed viscosity | | ASTMD2393 | 50.0到238 cP |
| hardness | Test Condition | Test Method | Test Result |
|---|
| | ASTMD2240 | 78到84 |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| tensile strength | | ASTMD638 | 39.3到77.3 MPa |
| Filling analysis | Test Condition | Test Method | Test Result |
|---|
| melt viscosity | | ASTMD3835 | 0.500到80.0 Pa·s |
| elastomer | Test Condition | Test Method | Test Result |
|---|
| Tensile stress | | ASTMD412 | 0.981到20.7 MPa |
| tensile strength | | ASTMD412 | 9.56到10.7 MPa |
| tensile strength | | ASTMD412 | 30.0到53.9 MPa |
| elongation | | ASTMD412 | 500到800 % |
| film | Test Condition | Test Method | Test Result |
|---|
| tensile strength | | ISO527-3 | 33.8到50.0 MPa |
| elongation | | ISO527-3 | 400到570 % |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| Glass Transition Temperature | | ASTME1356 | -46.5到-27.0 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare