PC 2856 BK COVESTRO GERMANY

Form：Granules | Grade：Extrusion grade

Properties:

transparentFood contact compliance

Typical Applications:

Household appliancesHousehold appliances

Supplier(1)

Product Description

Certificates(1)

Datasheet

Product Description

Typical Applications:	Household appliances \| Household appliances
Properties:	transparent \| Food contact compliance

Certificates

Technical Data Sheet

Other performance	Test Condition	Test Method	Test Result	Test Unit
Extreme Oxygen Index		ISO 4589-2	27	%
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
Tensile strain	Yield	ISO 527-2	6.1	%
Tensile strain	Tensile strain	Break	ISO 527-2	120	%
Tensile modulus		ISO 527-2	2400	MPa
tensile strength	Yield	ISO 527-2	66	MPa
tensile strength	tensile strength	Break	ISO 527-2	70	MPa
bending strength		ISO 178	73	MPa
Charpy Notched Impact Strength	23℃	ISO 179/1eA	75	KJ/m
Impact strength of cantilever beam gap	23℃	ISO 180/1A	85	KJ/m
Bending modulus		ISO 178	2400	MPa
thermal performance	Test Condition	Test Method	Test Result	Test Unit
UL flame retardant rating	0.75mm	UL94	V-2
	UL flame retardant rating	1.50mm	UL94	V-2
		UL flame retardant rating	2.4mm	UL94	V-2
			UL flame retardant rating	3.00mm	UL94	HB
			UL flame retardant rating	UL flame retardant rating	6.00mm	UL94	HB
Vicat softening temperature		ISO 306	146	℃
UL flame retardant rating	2.5mm	UL94	HB
Physical properties	Test Condition	Test Method	Test Result	Test Unit
density		ISO 1183	1.2
melt mass-flow rate		ISO 1133	10	g/10min
Shrinkage rate		ISO 294-4	0.65-0.7	%
Water absorption rate		ISO 62	0.12	%
Electrical performance	Test Condition	Test Method	Test Result	Test Unit
Volume resistivity	100Hz	IEC 60250	3.1
Volume resistivity	Volume resistivity	1MHz	IEC 60250	3.00
Dielectric strength		IEC 60243-1	34	kV/mm
Surface resistivity		IEC 60093	1E+16	Ohm
Volume resistivity		IEC 60093	1E+14	Ohm.m

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top