PA6 RC Plastics RCPA6 GF 30 RC Plastics, Inc. (Div. of LNP Engineering Plastics)
0
- Properties:Fillerglass fiber reinforced material30%filler by weight
Technical Data Sheet
physical property | Test Condition | Test Method | Test Result |
---|---|---|---|
density | ASTM D792 | 1.37 g/cm³ | |
Water absorption rate | ASTM D570 | 1.1 % | |
Shrinkage rate | ASTM D955 | 0.35to0.45 % |
Mechanical properties | Test Condition | Test Method | Test Result |
---|---|---|---|
tensile strength | ASTM D638 | 143 MPa | |
elongation | Break | ASTM D638 | 3.5 % |
Flexural modulus | ASTM D790 | 7450 MPa | |
bending strength | ASTM D790 | 211 MPa | |
coefficient of friction | Itself - Dynamic | ASTM D1894 | 0.32 |
Itself - Static | ASTM D1894 | 0.26 |
Impact resistance | Test Condition | Test Method | Test Result |
---|---|---|---|
Impact strength of cantilever beam gap | ASTM D256 | 48 J/m | |
Suspended wall beam without notch impact strength | ASTM D256 | 910 J/m |
Thermal performance | Test Condition | Test Method | Test Result |
---|---|---|---|
melting temperature | 216 °C | ||
Heat distortion temperature | ASTM D648 | 210 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top