
PC 123R-111 SABIC INNOVATIVE SPAIN
59
Form:Granules | Grade:Injection grade
Properties:
Low viscosityGeneral level improvementLow viscosityUL94HB
Typical Applications:
Industrial applicationsAutomotive sectorLawn equipmentGarden equipmentHousehold goodschipAerospace ApplicationsOutdoor applicationssporting goodsWindow encapsulationArchitectural application fieldmedicineElectrical fieldElectronic fieldlensMedical suppliesNursing suppliesElectrical appliancesPlastic bagLighting applicationsNon specific food
Product Description
Certificates(0)
Datasheet
Product Description
| Typical Applications: | Industrial applications | Automotive sector | Lawn equipment | Garden equipment | Household goods | chip | Aerospace Applications | Outdoor applications | sporting goods | Window encapsulation | Architectural application field | medicine | Electrical field | Electronic field | lens | Medical supplies | Nursing supplies | Electrical appliances | Plastic bag | Lighting applications | Non specific food |
| Properties: | Low viscosity | General level improvement | Low viscosity | UL | 94HB |
Certificates
No Data...
Technical Data Sheet
| Basic Performance | Test Condition | Test Method | Test Result | Test Unit |
|---|---|---|---|---|
| Water absorption rate | 23,24时间 | ASTM D-570 | 0.15 | % |
| mechanical properties | Test Condition | Test Method | Test Result | Test Unit |
| bending strength | 23 | ASTM D-790 | 93.2 | Mpa |
| Impact strength of cantilever beam gap | 23 | ASTM D-256 | 735 | J/m |
| Elongation at Break | 23 | GEPJ | 220 | % |
| Bending modulus | 23 | ASTM D-790 | 2200 | Mpa |
| Rockwell hardness | ASTM D-785 | R123 | ||
| tensile strength | 23 | GEPJ | 61.8 | Mpa |
| thermal performance | Test Condition | Test Method | Test Result | Test Unit |
| Linear coefficient of thermal expansion | -30-+30 | TMA | 7 | 10 |
| Hot deformation temperature | 1.82MPa | ASTM D-648 | 130 | |
| Physical properties | Test Condition | Test Method | Test Result | Test Unit |
| density | 23 | ASTM D-792 | 1.20 | |
| Shrinkage rate | Flow | ASTM D-955 | 0.5-0.7 | % |
| Electrical performance | Test Condition | Test Method | Test Result | Test Unit |
| Dielectric constant | 60Hz | ASTM D-150 | 3.2 | |
| UL flame retardant rating | 最少肉厚 | UL 94 | HB@1.50 | |
| Volume resistivity | 23 | ASTM D-257 | 10 | Ω |
| Dissipation factor | 60Hz | ASTM D-150 | 0.0009 |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.