
Unspecified MAJORIS DFR101 - 8229 AD MAJORIS FRANCE
Product Description
Certificates(0)
Datasheet
Product Description
Certificates
No Data...
Technical Data Sheet
| impact performance | Test Condition | Test Method | Test Result | Test Unit |
|---|---|---|---|---|
| Charpy Notched Impact Strength | 23°C | ISO 179 | 7.0 | kJ/m² |
| Impact strength of simply supported beam without notch | 23°C | ISO 179 | NoBreak | |
| Impact strength of cantilever beam gap | 23°C | ISO 180 | 4.5 | kJ/m² |
| Suspended wall beam without notch impact strength | 23°C | ISO 180 | NoBreak | |
| flammability | Test Condition | Test Method | Test Result | Test Unit |
| UL flame retardant rating | 1.6mm | UL 94 | V-2 | |
| 3.2mm | UL 94 | V-2 | ||
| Burning wire flammability index | 1.0mm | IEC 60695-2-12 | 960 | °C |
| Extreme Oxygen Index | ISO 4589-2 | 27 | % | |
| mechanical properties | Test Condition | Test Method | Test Result | Test Unit |
| tensile strength | Yield | ISO 527-2/50 | 31.0 | MPa |
| Tensile strain | Break | ISO 527-2/50 | >200 | % |
| Bending modulus | ISO 178 | 1600 | MPa | |
| thermal performance | Test Condition | Test Method | Test Result | Test Unit |
| Hot deformation temperature | 1.8MPa,Unannealed | ISO 75-2/A | 67.0 | °C |
| 0.45MPa,Unannealed | ISO 75-2/B | 110 | °C | |
| Physical properties | Test Condition | Test Method | Test Result | Test Unit |
| Shrinkage rate | Internal Method | 1.4 | % | |
| density | ISO 1183 | 0.960 | g/cm³ | |
| melt mass-flow rate | 230°C/2.16kg | ISO 1133 | 7.0 | g/10min |
| Electrical performance | Test Condition | Test Method | Test Result | Test Unit |
| Surface resistivity | 5E+13 | ohms | ||
| Dielectric strength | IEC 60243-1 | 16 | kV/mm | |
| Compared to the anti leakage trace index | IEC 60112 | PLC 0 |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.