Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| melt mass-flow rate | | ASTM D-1238 | 25 g/10min |
| Shrinkage rate | | ASTM D995 | 2.0 % |
| Shrinkage rate | | ASTM D995 | 2.0 % |
| melt mass-flow rate | | ASTM D1238 | 3.5 g/10min |
| melt mass-flow rate | | ASTM D1238 | 37 g/10min |
| hardness | Test Condition | Test Method | Test Result |
|---|
| Shore hardness | | ASTM D2240 | 95 |
| Shore hardness | | ASTM D2240 | 40 |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| elongation | | ASTM D-412 | 650 % |
| Shore hardness | | ASTM D-2240 | 49 |
| Fracture tensile strength | | ASTM D-412 | 17.9 Mpa |
| tensile strength | | ASTM D412 | 15 Mpa |
| elongation | | ASTM D412 | 550 % |
| Flame retardant performance | Test Condition | Test Method | Test Result |
|---|
| UL flame retardant rating | | UL -94 | V-0 3.60mm |
| UL flame retardant rating | | UL -94 | V-0 6.00mm |
| Limiting Oxygen Index | | ASTM2863 | 25 % |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|
| dielectric constant | | ASTM D150 | 2.30 1kHz |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| UL flame retardant rating | | UL 94 | V-2 |
| Linear coefficient of thermal expansion | | ASTM D746 | -56 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare
View Prices