TPU 65D
19
CompareTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| density | IS01183 | 1.66 g/cm³ | |
| Water absorption rate | IS062 | 0.05 % |
| other | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Linear forming shrinkage rate | IS02577 | 0.5 % | |
| Surface Resistivity | 1.5E+13 Ω | ||
| proof tracking index | 150 V |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Impact strength of simply supported beam without notch | IS0179 | 40 kJ/m² | |
| Charpy Notched Impact Strength | IS0179 | kJ/m² | |
| Flexural modulus | IS0178 | 11000 Mpa | |
| Yield bending strength | IS0178 | 250 Mpa | |
| elongation at break | IS0527 | 1.2 % | |
| Tensile strength at break | IS0527 | 170 Mpa |
| Flame retardant performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Flame retardant performance | UL 94 | V0 ℃ | |
| UL 94 | ℃ | ||
| UL 94 | ℃ | ||
| UL 94 | ℃ |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| GWFI | IEC60695-2-12 | ℃ | |
| IEC60695-2-12 | 960 ℃ | ||
| IEC60695-2-11 | ℃ | ||
| Heat distortion temperature | IS076 | ℃ | |
| IS076 | 260 ℃ | ||
| GWFI | IEC60695-2-12 | ℃ |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top