LLDPE DFDA-9020 SINOPEC TIANJIN
166
- Properties:High mobilityThermal stabilityHigh transparency
- Usages:Charger casingfilmInner packaging
CompareTechnical Data Sheet
| 基本性能 | Test Condition | Test Method | Test Result |
|---|---|---|---|
| 表观密度 | 优等品｜≥0.45 g/ml | ||
| 一级品｜≥0.42 g/ml | |||
| 合格品｜≥0.40 g/ml |
| 电气性能 | Test Condition | Test Method | Test Result |
|---|---|---|---|
| 水萃取液电导率 | 优等品｜＜5×10-3 S/m | ||
| 一级品｜＜5×10-3 S/m | |||
| 合格品｜＜5×10-3 S/m |
| 其它性能 | Test Condition | Test Method | Test Result |
|---|---|---|---|
| 100g树脂的增塑剂吸收量 | 优等品｜27 g | ||
| 一级品｜25 g | |||
| 合格品｜- g | |||
| 筛余物 | 0.25mm筛孔 | 优等品｜≤0.20 % | |
| 0.25mm筛孔 | 一级品｜≤0.20 % | ||
| 0.25mm筛孔 | 合格品｜≤0.80 % | ||
| 0.63mm筛孔 | 优等品｜≥90 % | ||
| 0.63mm筛孔 | 一级品｜≥90 % | ||
| 0.63mm筛孔 | 合格品｜≥80 % | ||
| 杂质粒子数 | 优等品｜≤16 个 | ||
| 一级品｜≤30 个 | |||
| 合格品｜≤90 个 | |||
| 白度 | 160℃过，10min后 | 优等品｜≥74 % | |
| 160℃过，10min后 | 一级品｜- % | ||
| 160℃过，10min后 | 合格品｜- % | ||
| 粘数 | 优等品｜143-136 ml/g | ||
| 一级品｜143-136 ml/g | |||
| 合格品｜143-136 ml/g | |||
| 挥发物含量 | 优等品｜≤0.30 % | ||
| 一级品｜≤0.40 % | |||
| 合格品｜≤0.50 % | |||
| 残留氯乙烯含量 | 优等品｜＜8 μg/g | ||
| 一级品｜＜10 μg/g | |||
| 合格品｜- μg/g | |||
| 鱼眼 | 优等品｜≤20 个/400cm2 | ||
| 一级品｜≤40 个/400cm2 | |||
| 合格品｜- 个/400cm2 |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top