
POM Z4520 ASAHI JAPAN
207
Form:Granules | Grade:Injection grade
Properties:
Medium viscosityLow VOC
Typical Applications:
Industrial machineryAutomotive sector
Product Description
Certificates(0)
Datasheet
Product Description
| Typical Applications: | Industrial machinery | Automotive sector |
| Properties: | Medium viscosity | Low VOC |
Certificates
No Data...
Technical Data Sheet
| other | Test Condition | Test Method | Test Result | Test Unit |
|---|---|---|---|---|
| purpose | 车辆配件 | |||
| characteristic | 高度结晶的热塑性工程树脂 | |||
| Basic Performance | Test Condition | Test Method | Test Result | Test Unit |
| melt mass-flow rate | ISO 1133 | 9.3 | g/10min | |
| mechanical properties | Test Condition | Test Method | Test Result | Test Unit |
| bending strength | ISO 178 | 85 | MPa | |
| Bending modulus | ISO 178 | 2500 | MPa | |
| Tensile stress | Break | ISO 178 | 34 | % |
| Yield | ISO 527-2 | 64 | MPa | |
| Tensile modulus | ISO 527-2 | 2600 | MPa | |
| Physical properties | Test Condition | Test Method | Test Result | Test Unit |
| Shrinkage rate | Across Flow | ISO 294-4 | 2.5 | % |
| Flow | ISO 294-4 | 2.2 | % |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.